HP XP20000/XP24000 HP StorageWorks XP24000/XP20000 Remote Web Console User Gui - Page 62
Device Information
View all HP XP20000/XP24000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Figure 28 Identity Window Item Device Information LDEV Information Apply button Cancel button Description See "Device Information" (page 62). See "LDEV Information" (page 63). Implements all the changes or settings. This button is active only in Modify mode. Closes the window without making changes or settings. This button is available only in Modify mode. Device Information Device Information, in the upper part of the Identity window, has the following features: Item Serial Number IP Address Device Name Description Serial number of the connected storage system. IP address of the connected storage system (SVP). Device name of the connected storage system. The Remote Web Console user can change the device name with Modify mode. Enter a device name using up to 180 alphanumeric characters (ASCII codes), except for some symbols, such as and %. You can also use a space, except for before and after the device name. If you enter a space before or after the device name, an error occurs when you click Apply. The device name is required to use SNMP Agent. For detailed information on SNMP, see the HP StorageWorks XP24000/XP20000 SNMP Agent Reference Guide. Make sure to document the device name because the settings will be cleared when the SVP is replaced. 62 Using the Remote Web Console GUI