IBM 86655RY Hardware Maintenance Manual - Page 158

Notes: a. See "Features and connector locations of ServeRAID-4H controller" on page 139 for the channel connector locations of the 4H controller, "Features and connector locations of ServeRAID-4L controller" on page 141 for the channel connector locations of the 4L controller, and "Features and connector locations of ServeRAID-4M controller" on page 143 for the channel connector locations of the 4M controller. b. The following illustration depicts the ServeRAID-4H controller. The ServeRAID-4L controller will have a slightly different appearance. Figure 5. Connecting a ServeRAID-4H controller internal channel connector 11. Connect the other end of the SCSI cable to the Active PCI backplane or to a SCSI device in the server. (See your server documentation or the system label inside the server cover for the location of the SCSI connector on the backplane.) 12. If you have physical drives to install, install them now. See your server documentation for drive installation instructions. Note: The ServeRAID controllers use SCSI ID 7 and/or 6. 13. Install the server cover. 14. If you disconnected the cables and power cords in step 2 on page 146, reconnect the cables and cords. See your server documentation if you need detailed instructions. 148 Hardware Maintenance Manual: Netfinity 7600 - Type 8665 Models 1RY, 2RY