IBM 86655RY Hardware Maintenance Manual - Page 73

To remove the media-bay bezel: 1. Release the two tabs at the bottom edge of the media-bay bezel and pull the bottom of the bezel slightly away from the server. 2. Pull the media-bay bezel down to release the two tabs at the top edge of the bezel. Store the bezel in a safe place. Removing the front trim bezel 1 Side tabs 2 Bottom tabs 1. Release the three tabs on the right side of the front trim bezel and release the two tabs on the left side of the bezel. 2. Gently separate the bezel partly from the server. 3. Release the two bottom tabs on the bezel and lift the bezel away from the server. Working with adapters You can install up to six PCI adapters in the expansion connectors on the processor board. All six of the slots are peripheral component interconnect (PCI) expansion slots. The server comes with an integrated super video graphics array (SVGA) video controller, which is not removable. If you want to disable this controller and use a video adapter instead, you can install a video adapter in an expansion slot. When you install a PCI video adapter, the server BIOS automatically disables the integrated video controller. Note: Video adapters are supported in all six PCI slots. The following illustration shows the location of the 64-bit PCI expansion slots on the processor board. Note: The illustrations in this book might differ slightly from your hardware. Installing options 63