IBM 86655RY Hardware Maintenance Manual - Page 240

Error Code/Symptom FRU/Action 1800 (No more hardware interrupt 1. Run Configuration/Setup available for PCI adapter) 2. Failing Adapter 3. I/O Legacy Board 1962 (Drive does not contain a valid 1. Verify a bootable operating system is installed. boot sector) 2. If RAID system, refer to the IBM ServeRAID Hardware Maintenance Manual for more information. 3. Run Diagnostics 4. Hard Disk Drive 5. Cable 6. SCSI Backplane 7. I/O Legacy Board 2400 (Video controller test failure) 1. Video Adapter (if installed) 2. I/O Legacy Board 2462 error) (Video memory configuration 1. Video Adapter (if installed) 2. I/O Legacy Board 5962 error) (IDE CD-ROM configuration 1. Run Configuration/Setup 2. CD-ROM Drive 3. CD-ROM Power Cable 4. IDE Cable 5. I/O Legacy Board 6. Battery 8603 (Pointing Device Error) 1. Pointing Device 2. I/O Legacy Board 00012000 (Machine check architecture error) 1. Processor 2. Optional Processor 3. Processor/PCI Board 00019501 (Processor 1 is not functioning - 1. VRM 1 check VRM and processor LEDs) 2. Processor 1 3. Processor Board 4. I/O Legacy Board 00019502 (Processor 2 is not functioning - 1. VRM 2 check VRM and processor LEDs) 2. Processor 2 3. Processor Board 4. I/O Legacy Board 00019503 (Processor 3 is not functioning - 1. VRM 3 check VRM and processor LEDs) 2. Processor 3 3. Processor Board 4. I/O Legacy Board 230 Hardware Maintenance Manual: Netfinity 7600 - Type 8665 Models 1RY, 2RY