IBM 86655RY Hardware Maintenance Manual - Page 189

Figure 17. ServeRAID cluster validation window The server you selected in step 1 on page 178 is listed in the Node A box. Note: You cannot change the Node A system in the Cluster validation window. To select a different system, click Cancel to return to the Main Tree. 3. From the Node B pull-down menu, select your second server. Note: The Node B system defaults to the first system in the Main Tree other than the Node A system. If there are no remote systems in the Main Tree, click Cancel to return to the Main Tree and add a remote system. You can also type in the Node B name. 4. Click Start. The ServeRAID Manager program scans both systems to verify the ServeRAID cluster configuration. The progress indicator reports the progress of the validation. 5. If you want to stop the validation before it completes, click Cancel. Otherwise, if the ServeRAID Manager program finds problems with the ServeRAID cluster configuration, it reports the problems in the Problems found message field. If there are no problems with the ServeRAID cluster configuration, the message field reports only the cluster pairings found. 6. To view the problem report events in an easy-to-read window, double-click an event in the Problems found message field. 7. To save the contents of the Problems found message field, click Save. A Save as window opens. Specify the file name for the message field log and click OK. 8. Click Done to exit the Cluster validation window. If the ServeRAID cluster configuration has problems, fix the problems; then, use Validate cluster again. Installing and configuring ServeRAID controllers 179