IBM 86655RY Hardware Maintenance Manual - Page 72
Removing the top cover, Removing the media-bay bezel, Attention
![]() |
View all IBM 86655RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Removing the top cover 1 Top cover 2 Captive screws To remove the server top cover: 1. Loosen the two thumbscrews on the back edge of the top cover. 2. Slide the top cover slightly toward the rear of the server. Lift the cover off the server and set the cover aside. Attention: For proper cooling and airflow, replace the top cover before turning on the server. Operating the server for extended periods of time (over 30 minutes) with the top cover removed might damage server components. Removing the media-bay bezel 1 Media-bay bezel 62 Hardware Maintenance Manual: Netfinity 7600 - Type 8665 Models 1RY, 2RY
![](/manual_guide/products/ibm-866561y-hardware-maintenance-manual-c694d19/72.png)
62
Hardware Maintenance Manual: Netfinity 7600
–
Type 8665 Models 1RY, 2RY
Removing the top cover
±
1
²
Top cover
±
2
²
Captive screws
To remove the server top cover:
1.
Loosen the two thumbscrews on the back edge of the top cover.
2.
Slide the top cover slightly toward the rear of the server.
Lift the cover off the
server and set the cover aside.
Attention:
For proper cooling and airflow, replace the top cover before turning
on the server.
Operating the server for extended periods of time
(over 30 minutes) with the top cover removed might damage server
components.
Removing the media-bay bezel
±
1
²
Media-bay bezel