IBM 86655RY Hardware Maintenance Manual - Page 177
Copy the Configuration from Drives to Controller, Restore to Factory Default Settings
![]() |
View all IBM 86655RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
When you select the Advanced Functions from the Main Menu, the following choices appear on the screen. Attention: Be careful when making selections from this menu. If you change the configuration, you might lose data. • Restore to Factory Default Settings is used to reset the configuration. When you reset the configuration, you will not have access to any data stored on the logical drives attached to the selected ServeRAID controller. This choice deletes the existing configuration information, sets all functional physical drives attached to the controller to the ready state, and deletes all logical drives defined for the controller. • Copy the Configuration from Drives to Controller reads the most common configuration from the drives in the server and copies it to the ServeRAID controller. • Configure BIOS Settings is used to modify the BIOS settings, such as the Bootable CD-ROM setting, for the ServeRAID controller (not supported in ServeRAID family of products). • View Controller and PCI Information shows the ServeRAID controller hardware and PCI register information. • Exit is used to exit from the Mini-Configuration program. Installing and configuring ServeRAID controllers 167
![](/manual_guide/products/ibm-866561y-hardware-maintenance-manual-c694d19/177.png)