IBM 86655RY Hardware Maintenance Manual - Page 188
Validating a cluster, Shared, Non-shared, Actions
![]() |
View all IBM 86655RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
Figure 16. Configure controller for clustering window 6. Click Shared or Non-shared for the logical drive you have just defined. 7. Select the merge group number you want to use for the logical drive you just defined. 8. Click OK. Validating a cluster Use this feature to determine if your cluster is configured correctly. Note: You must have the ServeRAID Manager program installed on all servers in the cluster for this feature to work. To validate a cluster, do the following: 1. In the Main Tree, click a server in the cluster. Ó 2. Click Actions Validate cluster. A window similar to the following opens. 178 Hardware Maintenance Manual: Netfinity 7600 - Type 8665 Models 1RY, 2RY
![](/manual_guide/products/ibm-866561y-hardware-maintenance-manual-c694d19/188.png)
178
Hardware Maintenance Manual: Netfinity 7600
–
Type 8665 Models 1RY, 2RY
6.
Click
Shared
or
Non-shared
for the logical drive you have just defined.
7.
Select the merge group number you want to use for the logical drive you just
defined.
8.
Click
OK
.
Validating a cluster
Use this feature to determine if your cluster is configured correctly.
Note:
You must have the ServeRAID Manager program installed on all servers in the
cluster for this feature to work.
To validate a cluster, do the following:
1.
In the Main Tree, click a server in the cluster.
2.
Click
Actions
Validate cluster
. A window similar to the following opens.
Figure 16. Configure controller for clustering window