IBM 86655RY Hardware Maintenance Manual - Page 90
Installing the top cover, Lower the cover with the rear edge of the cover about 25 mm 1 inch back
![]() |
View all IBM 86655RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Media-bay bezel To install the media-bay bezel: 1. Insert the two tabs on the top of the media-bay bezel into the matching holes on the server chassis. 2. Push the bottom of the media-bay bezel toward the server until the two tabs at the bottom of the bezel snap into place. Installing the top cover Top cover Captive screws To install the server top cover: 1. Before installing the cover, check that all cables, adapters, and other components are installed and seated correctly and that you have not left loose tools or parts inside the server. 2. Lower the cover with the rear edge of the cover about 25 mm (1 inch) back from the rear edge of the server. 3. Slide the cover forward. 4. Tighten the two captive screws on the back edge of the cover. 80 Hardware Maintenance Manual: Netfinity 7600 - Type 8665 Models 1RY, 2RY
![](/manual_guide/products/ibm-866561y-hardware-maintenance-manual-c694d19/90.png)