IBM 86655RY Hardware Maintenance Manual - Page 80
Installing a 5.25-inch removable-media drive, surface on the server; then
View all IBM 86655RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Installing a 5.25-inch removable-media drive Refer to the following illustrations when installing a 5.25-inch removable media drive. Before you begin: • Read "Safety information" on page 249. • Review the information in "Before you begin" on page 60. • Read the documentation that comes with the option. Slide rails for use with a tape drive Filler panel with EMI sheild Slide rails Drive Choose the bay in which you want to install the drive. Also, check the instructions that come with the drive to see if you need to set any switches or jumpers on the drive. To install a removable-media drive in one of the left front bays: 1. Review the information in"Before you begin" on page 60. 2. Turn off the server and all attached devices. Disconnect all external cables and remove the top cover. 3. Remove the media-bay bezel. 4. Remove the filler panel from the bay opening. Keep the filler panel nearby. Note: The server EMI integrity and cooling are both protected by having the left front bays covered or occupied. When you install a drive, save the filler panel from the bay, in case you later remove the drive and do not replace it with another. 5. Touch the static-protective bag containing the drive to any unpainted metal surface on the server; then, remove the drive from the bag and place it on a staticprotective surface. 6. Remove the snap-on slide rails from the filler panel and snap the rails on the drive. Store the filler panel for later use. Note: Slide rails for installing a tape drive are attached with screws. Use the screws to attach the rails to the side of the tape drive. 7. Align the slide rails on the drive with the guide rails in the bay; then, slide the drive into the bay until it snaps into place. Note: If you are installing a tape drive, use the screws that are shipped next to the tape drive rails to attach the tape drive to the front of the chassis. 8. Disconnect the shuttle (see "Disconnecting the shuttle" on page 128). 70 Hardware Maintenance Manual: Netfinity 7600 - Type 8665 Models 1RY, 2RY