IBM 86655RY Hardware Maintenance Manual - Page 171

Figure 14. Configuration summary window Note: To change the configuration, click Modify arrays or Modify logical drives. 16. Click Apply to accept and save the configuration. The configuration is saved in the ServeRAID controller and on the physical drives. 17. If you have multiple controllers, for each controller repeat steps 1 on page 157 through step 16. 18. When you have completed configuration, you can change to Information mode and change controller settings. See "Using Information mode" on page 162 for more information. If you do not want to change any settings, exit the ServeRAID Manager program and remove the CD from the CD-ROM drive. 19. Restart the server. Note: If you are configuring your startup (boot) ServeRAID controller, you must install the device driver while installing the operating system. Installing and configuring ServeRAID controllers 161