Icom IC-92AD Instruction Manual - Page 108
DV set mode items
View all Icom IC-92AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
12 MENU SCREEN OPERATION ■ DV set mode items The following items are selectable for B band. D Auto reply This function replies to an individual station call even you are away from the transceiver. After a manual transmission (pushing [PTT]), the Auto Reply setting returns to OFF automatically. • OFF : No reply is performed even if a call is received. (default) • ON : Sets the caller's call sign and replies to the call with the programmed own call sign. • VOICE : Sets caller's call sign and replies to the call with the recorded audio in REPLY VOICE memory of DV VOICE MEMO. AUTO REPLY rOFF ON VOICE AUTO REPLY OFF ON rVOICE NOTE: When "ON" or "VOICE" is set in the auto reply function, the power save function (p. 96) stop functioning automatically to receive call sign signal properly. D Digital code Sets the desired digital code for digital code squelch operation. Total of 100 codes (00-99) are available. (default: 00) DIGITAL CODE 00 DIGITAL CODE 99 D DV data TX During low-speed data operation, auto data transmission function is available. This function transmits when data has been input from PC via the [DATA] jack. (default: PTT) DV DATA TX rPTT AUTO DV DATA TX PTT rAUTO • PTT • AUTO : Data from [DATA/SP/MIC] transmits when [PTT] is pushed. (default) : Data from [DATA/SP/MIC] transmits automatically. 100