Icom IC-92AD Instruction Manual - Page 87

9 MEMORY/CALL CHANNELS ■ Copying memory/call contents This function transfers a memory channel's contents to VFO (or another memory/call channel). This is useful when searching for signals around a memory channel frequency and for recalling the offset frequency, subaudible tone frequency etc. D Memory/call➪VFO q Select the memory (call) channel to be copied. ➥ Push [MR] or [CALL] to select memory mode or call channel mode, then rotate [DIAL] to select the desired channel. wPush and hold [S.MW](MR) for 1 sec. to enter select memory write mode. • 1 short and 1 long beep sound. • Memory channel number blinks. e Rotate [DIAL] to select "VFO." r Push and hold [S.MW](MR) for 1 sec. to write the selected channel contents to VFO mode. • Returns to VFO mode automatically. [EXAMPLE]: Copying memory channel 11 to VFO. During memory mode, rotate [DIAL] to select memory channel 11 . Push and hold FM A145 870 MR B S.MW for 1 sec. FM r145 870 µ 011 BANK :---- µ 011 MNAME: SKIP :OFF 1 Holding [S.MW](MR) for 2 sec. at the step w, will also 2 copy the memory contents to VFO. In this case, the steps 3 e and r are not necessary. 4 D Memory/call➪memory/call 5 q Select the memory (call) channel to be copied. ➥ Push [MR] or [CALL] to select memory mode or call 6 channel mode, then rotate [DIAL] to select the desired 7 memory channel. wPush and hold [S.MW](MR) for 1 sec. to enter select 8 memory write mode. 9 • 1 short and 1 long beep sound. • Memory channel number blinks. 10 • Do not hold [S.MW](MR) for more than 2 sec. otherwise the 11 memory contents will be copied to VFO. e Rotate [DIAL] to select the target memory (call) channel. 12 r Push and hold [S.MW](MR) for 1 sec. again to copy. 13 14 15 Rotate [DIAL] to select VFO . 16 Push and hold FM 1 4 5 8 7 0 145 000 µ VFO MR B for 1 sec. S.MW FM A 17 PSKIP 18 19 VFO is selected. 79