Icom IC-92AD Instruction Manual - Page 86

9 MEMORY/CALL CHANNELS [EXAMPLE]: Programming the bank name "AIR" into the scan edge channel 03A. Push MR B S.MW to select memory mode. FM A145 870 µ 011 Push 2 SCAN or 8 TS to select BNAME *. AM 127 500 µ 03A BANK :A-01 rBNAME:A MNAME: SNAME: Rotate [DIAL] to select scan edge channel 03A. AM A127 500 µ 03A Push and hold MR B S.MW for 1 sec. Enter select memory write mode. AM r127 500 µ 03A BANK :A-01 BNAME: MNAME: SNAME: Scan edge channel 03A *Select "MNAME" or "SNAME" when programming the memory name or the scan name, respectively. Rotate [DIAL] to enter A , push 6 . M.NAME AM 127 500 µ 03A BANK :A-01 rBNAME:AI MNAME: SNAME: Enter I and R with [DIAL] and 6 M.NAME . AM 127 500 µ 03A BANK :A-01 rBNAME:AIR MNAME: SNAME: Push and hold MR B S.MW for 1 sec. to program. 78 ■ Selecting memory/bank name indication During memory mode operation, either the programmed memory name or bank name can be displayed below the frequency indication. NOTE: The programmed scan name is displayed during the programmed scan edge channel selection. q Push [MR] to select memory mode. w While pushing [M.NAME](6), rotate [DIAL] to select dis- play indication type from memory name (normal size), memory name (large size), bank name and OFF. • Push and hold [M.NAME](6) for 1 sec. can be also selectable. [DIAL] Name indication OFF. AM A127 500 µ 03A Memory name indication (Normal) AM A127 500 AIRPORT µ 03A 6 M.NAME Memory name indication (Large) AM A AIRPORT 127.500 µ 03A Bank name indication AM A127 500 AIR µ 03A