Icom IC-92AD Instruction Manual - Page 24

4 FREQUENCY AND CHANNEL SETTING D Call/TV*/Weather† channels Call channels are used for quick recall of most-often used frequencies. *Appears only when TV channels are programmed via the optional RS-92. Also available for A band operation only. †Available for the U.S.A. version only. qPush [CALL] several times to select call channels/TV channels (A band only)/Weather channels. • Call/TV/Weather channels can be selected in sequence. w Rotate [DIAL] to select the desired channel. [DIAL] • Call channel indication +DUP DTCS FM PRIO WX EMR A145 000 MemoNameP SKIP µ C0 LOW ATT CALLC RX CS • TV channel indication +DUP DTCS WFM PRIO WX EMR A 10 ch 25 MemoNameP SKIP µ TV LOW ATT • Weather channel indication +DUP DTCS PRIO WX EMR A 1 c h 25 MemoNameP SKIP µ WX LOW ATT 16 ■ Operating band selection The transceiver can receive the AM broadcast, HF bands, 50 MHz, FM broadcast, VHF air, 144 MHz, 300 MHz, 400 MHz or 800 MHz* bands. (Some bands are not selectable for B band operation. See next page for details.) ➥ In VFO mode, push [BAND] several times to select the desired frequency band. • If VFO mode is not selected, such as a memory channel/call channel/TV channel/Weather channel, push [VFO] to select VFO mode first, then push [BAND] to select the desired band. ➥ While pushing and holding [BAND], rotating [DIAL] also selects the frequency band. [DIAL] D BAND +DUP DTCS FM PRIO WX EMR A145 000 MemoName PSKIP µ 000 LOW ATT Available frequency bands are different depending on version. See the specification for details. (pgs. 135, 136) *Some frequency ranges are blocked for the U.S.A. version by regulation.