Icom IC-92AD Instruction Manual - Page 36

5 BASIC OPERATION ■ TV channel operation TV channel operation is available only when TV channels are programmed using the optional RS-92. (p. 137) Also available for A band operation only. D TV channel receiving q Push [CALL] several times to select TV channels. • "TV" and channel number appear. w Rotate [DIAL] to select the desired channel. • While pushing and holding [BAND], rotating [DIAL] selects the all channels including skip channel. [DIAL] CALLC RX CS TV mode indication Channel indication +DUP DTCS WFM PRIO WX EMR A 10 25 MemoNameP SKIP µ TV LOW ATT D Skip channel setting Unwanted channels can be skipped for rapid selection, etc. q Push [CALL] several times to select TV channels. • "TV" and channel number appear. 28 w Rotate [DIAL] to select the channel to be skipped. • To clear the skip setting, rotate [DIAL] while pushing and holding [BAND] to select a skip channel. e Push and hold [SKIP](5) for 1 sec. to toggle the skip setting ON and OFF. • "SKIP" appears when the channel is set as skip channel. [DIAL] Appears D BAND 5 SKIP CALLC RX CS +DUP DTCS WFM PRIO WX EMR A 12 25 MemoNameP SKIP µ TV LOW ATT D Automatic TV channel programming TV channels can be programmed automatically. q Push [CALL] several times to select TV channels. • "TV" and channel number ap- +DUP DTCS WFM PRIO WX EMR A 2 25 pear. w Push [SCAN](2) to start TV channel programming. MemoNameP SKIP µ TV LOW ATT • The programming will automatically stop after scanning all channels.