Icom IC-92AD Instruction Manual - Page 5
Notices - radio
View all Icom IC-92AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
NOTICES D Using the optional HM-175GPS Noise signals from the HM-175GPS may interfere with the IC-92AD's AM radio or HF band reception. In this case, set the HM-175GPS's microphone cable as distant to the antenna as far as possible, or turn off the HM175GPS. D Data output from HM-175GPS The optional HM-175GPS outputs GPS data (position data, etc.) to IC-92AD at intervals while receiving only. Therefore, the transceiver is not updated GPS data while transmitting. The transceiver transmits GPS data that was received prior to the last IC-92AD DV mode transmit. D About OPC-1797 • NEVER connect the optional OPC-1797 CONNECTION CABLE with non-Icom article specified. • When connecting a monaural plug to 2.5 (d) mm, it acts as short and becomes a cause of failure. • Turn power OFF when connecting or disconnecting the OPC-1797. 1 2 3 4 5 6 7 8 9 10 11 12 13 Icom, Icom Inc. and the logo are registered trademarks of Icom 14 Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries. 15 Microsoft, Windows and Windows Vista are either registered trade- 16 marks or trademarks of Microsoft Corporation in the United States 17 and/or other countries. 18 APRS® is a registered trademark of Mr. Bob Bruninga in the U.S.A. and other countries. 19 iv