Icom IC-92AD Instruction Manual - Page 22
Frequency And Channel Setting
![]() |
View all Icom IC-92AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
4 FREQUENCY AND CHANNEL SETTING ■ Main band selection The IC-92AD has two independent operating bands; A band (VFO A) and B band (VFO B). A band (VFO A) can operate 0.495 MHz to 999.990 MHz*, and B band (VFO B) can operate 118 MHz to 174 MHz and 350 MHz to 470 MHz. *Some frequency ranges are blocked for the U.S.A. version by regulation. NOTE: When in dualwatch mode, transmission is available on the MAIN band only. D How to change the main band ➥ Push [MAIN/DUAL] to toggle between A and B band. ➥ Push and hold [MAIN/DUAL] for 1 sec. to turn the dual- watch operation ON and OFF. • While in dualwatch operation, the display indicates A band in the upper half and B band in the lower half. ➥ During dualwatch operation, push [MAIN/DUAL] to toggle between A band or B band as the main operating band. Single band operation Dualwatch operation • Selecting A band +DUP DTCS FM PRIO WX EMR A146 010 MemoName PSKIP µ 000 LOW ATT Push Push • Selecting upper side as main band +DUP DTCS W PS 146 010 PRIO µ 000 FM +DUP DTCS W PS 440 000 PRIO EM µ 000 FM Push • Selecting B band +DUP DTCS FM PRIO WX EMR B440 000 MemoName PSKIP µ 000 LOW ATT for 1 sec. • Selecting lower side as main band +DUP DTCS W PS 146 010 PRIO µ 000 FM +DUP DTCS W PS 440 000 PRIO EM µ 000 FM 14
![](/manual_guide/products/icom-ic92ad-instruction-manual-b1b3608/22.png)