Icom IC-92AD Instruction Manual - Page 11
External Dc In Jack [dc In] - programming cable
![]() |
View all Icom IC-92AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
PANEL DESCRIPTION 2 i KEYPAD (pgs. 4, 5) o CALL/RX➝CS KEY [CALL]/[RX➝CS](CALL) ➥ Push to select the call channel/TV channel/weather channel. (pgs. 16, 28, 128) ➥ During DV mode operation, push and hold for 1 sec. to set the received call signs (station and repeaters) for operation. (p. 47) ➥ Enters or sends the DTMF code 'C'. (pgs. 117, 118) !0 MEMORY/SELECT MEMORY WRITE KEY [MR]/ [S.MW](MR) ➥ Push to select memory mode. (p. 15) ➥ During memory mode operation, push to toggle between memory and memory bank mode. (p. 76) ➥ Push and hold for 1 sec. to enter select memory write mode. (p. 74) ➥ Enters or sends the DTMF code 'B'. (pgs. 117, 118) !1 VFO/MHz KEY [VFO]/[MHz](VFO) ➥ Push to toggle select VFO mode. (p. 15) ➥ During VFO mode operation, push and hold for 1 sec. to select and toggle 1 MHz and 10 MHz tuning steps. (p. 18) ➥ Enters or sends the DTMF code 'A'. (pgs. 117, 118) !2 MENU/LOCK KEY [MENU/LOCK] ➥ Push to toggle menu screen indication ON and OFF. (p. 93) ➥ Push and hold for 1 sec. to toggle the lock function ON and OFF. (p. 25) 2 !3 EXTERNAL DC IN JACK [DC IN] ➥ Connects the supplied wall charger, BC-167A/D, to charge the attached battery pack. (p. 10) ➥ Connect an external DC power supply through the optional CP-12L, CP-19R or OPC-254L for external DC operation. (p. 13) !4 VOLUME CONTROL [VOL] Rotate to adjust the audio output level. (p. 20) !5 CONTROL DIAL [DIAL] ➥ Rotate to tune the operating frequency. (p. 18) ➥ During memory mode, rotate to select the memory channel. (pgs. 15, 72) ➥ While pushing and holding [BAND], selects the operating band in VFO mode. (p. 18) ➥ While scanning, changes the scanning direction. (p. 83) ➥ While pushing and holding [SQL], sets the squelch level. (p. 21) ➥ While pushing and holding [BAND], selects the programmed bank in memory mode. (p. 75) The assigned function for [VOL] and [ ]/[ ] can be exchanged in initial set mode. (p. 99) !6 EXTERNAL SPEAKER/MICROPHONE JACK [DATA/SP/MIC] Connect a communication cable, optional speaker microphone or headset, if desired. See page 137 for a list of available options. 3
![](/manual_guide/products/icom-ic92ad-instruction-manual-b1b3608/11.png)