Icom IC-92AD Instruction Manual - Page 50
Repeater operation in the same zone
View all Icom IC-92AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
7 DV MODE OPERATION D Repeater operation in the same zone q Set the desired repeater's frequency, offset and shift direction in B band. (pgs. 18, 31) • Select DV mode in advance. (p. 21) w Set your own call sign. (p. 38) • See p. 34 for your own call sign programming. e Set the desired station call sign. (p. 39) • See p. 36 for station call sign programming. r Set the repeater's call sign as follows; z Enter "R1" in call sign set mode. ❮MENU screen❯ ➪ ❮CALL SIGN❯ ➪ ❮R1❯ (Push [MENU/ ]) (Rotate [DIAL]†, then push [ ](5)‡.) • Pushing and holding [CS](9) for 1 sec. is also available to enter call sign set mode. x Rotate [DIAL]† to select the nearest repeater's call sign. c Push [ ](5) to set the call sign for "R1." • Return to CALL SIGN screen. v Rotate [DIAL]† to select "R2" then push [ ](5)†. • RPT2 CALL SIGN screen is displayed. b Rotate [DIAL]† to select the desired repeater's (in the same zone) call sign. • Select "NOT USE✱" when not operating RPT2. n Push [ ](5) to set the call sign for "R2." • Return to CALL SIGN screen. CALL SIGN rUR:CQCQCQ R1:RPT1AA R2:NOT USE* MY:MYCALL /IC92 42 m Push [MENU/ ] to return to frequency indication. t Push [PTT] to transmit; release to receive. †[DIAL] ↔ [ ](2)/[ ](8) ‡[ ](5) ↔ [ ](6)