Icom IC-92AD Instruction Manual - Page 138
Auto power OFF, Auto power ON, Time-out timer, PTT lock
View all Icom IC-92AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
13 OTHER FUNCTIONS ■ Auto power OFF The transceiver can be set to automatically turn OFF after a specified period with a beep when no switch is pushed. 120 min., 90 min., 60 min., 30 min. and OFF can be specified. The specified period is retained even when the transceiver is turned OFF by the auto power-off function. To cancel the function, select "OFF" in the auto power-off item in set mode. This can be selected with "AP OFF" in set mode. (p. 96) ❮MENU screen❯ ➪ ❮SET MODE❯ ➪ ❮AP OFF❯ (Push [MENU/ ]) (Rotate [DIAL]†, then push [ ](5)‡.) ■ Auto power ON The transceiver can be set to automatically turn ON after a specified period. The timer can be selected within 30 min. to 24 hrs. in 30 min. steps. This can be selected with "AP ON" in set mode. (p. 98) ❮MENU screen❯ ➪ ❮SET MODE❯ ➪ ❮AP ON❯ (Push [MENU/ ]) (Rotate [DIAL]†, then push [ ](5)‡.) When operating with battery pack or case and the battery is exhausted, auto power-on does not function. During standby, a small current still flows in the radio. ■ Time-out timer To prevent accidental prolonged transmission, etc., the transceiver has a time-out timer. This timer cuts a transmission OFF after 1, 3, 5 or 10 min. of continuous transmission. This timer can be cancelled (default). Approx. 10 sec. before the time-out timer is activated, the transceiver emits a beep tone as a warning. This can be selected with "TOT" in set mode. (p. 99) ❮MENU screen❯ ➪ ❮SET MODE❯ ➪ ❮TOT❯ (Push [MENU/ ]) (Rotate [DIAL]†, then push [ ](5)‡.) ■ PTT lock To prevent accidental transmission, etc., the transceiver has a PTT lock function. This can be selected with "PTT LOCK" in set mode. (p. 99) ❮MENU screen❯ ➪ ❮SET MODE❯ ➪ ❮PTT LOCK❯ (Push [MENU/ ]) (Rotate [DIAL]†, then push [ ](5)‡.) 130