Icom IC-92AD Instruction Manual - Page 13
Pushed momentarily, Pushed and held for 1 sec.
![]() |
View all Icom IC-92AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
PANEL DESCRIPTION 2 KEY Pushed momentarily Pushed and held for 1 sec. 2 • Inputs digit '7' for frequency input, memory channel selection, • During FM/FM-N mode operation, selects repeater tone, tone 7DSQ TONE etc. • While pushing [PTT], this key sends the DTMF code "7." squelch, tone squelch reverse, DTCS squelch, DTCS squelch reverse and no tone operation in sequence. (p. 124) • During DV mode operation, selects digital call sign squelch, digital code squelch and no squelch operation in sequence. (p. 124) • Inputs digit '8' for frequency input, memory channel selection, • Selects tuning step selection. (p. 18) 8 etc. TS • While pushing [PTT], this key sends the DTMF code "8." • Inputs digit '9' for frequency input, memory channel selection, • Select DTMF memory mode. (p. 117) 9 CS etc. DTMF.M • While pushing [PTT], this key sends the DTMF code "9." (Push and hold for 2 sec. while operating DV mode.) • During DV mode operation, CALL SIGN setting mode is displayed. (pgs. 38, 48) • Inputs digit '0' for frequency input, memory channel selection, • During DV mode operation, set "CQCQCQ" for station's call sign 0 etc. for operation. CQ • While pushing [PTT], this key sends the DTMF code "0." . # CD T.SCAN • Inputs MHz digit for frequency input. • During FM/FM-N mode operation, starts tone scan function. • While pushing [PTT], this key sends the DTMF code "F (#)." (p. 126) • During DV mode operation, RX CALL SIGN is displayed. (p. 46) REC MODE • During DV mode operation, selects the record track for voice • Selects the operating mode. (p. 21) memory. (p. 66) • While pushing [PTT], this key sends the DTMF code "E (✱)." 5
![](/manual_guide/products/icom-ic92ad-instruction-manual-b1b3608/13.png)