Icom IC-92AD Instruction Manual - Page 52
Repeater operation into another zone
View all Icom IC-92AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
7 DV MODE OPERATION D Repeater operation into another zone q Set the desired repeater's frequency, offset and shift direction in B band. (pgs. 18, 31) • Select DV mode in advance. (p. 21) w Set your own call sign. (p. 38) • See p. 34 for your own call sign programming. e Set the desired station call sign. (p. 39) • When making a CQ call Set the desired repeater's (in a different zone) call sign with a "/" symbol at the 1st digit, for the area in which you want to make a CQ call, into "UR." • See p. 36 for station call sign programming. r Set the repeater's call sign as follows; z Enter "R1" in call sign set mode. ❮MENU screen❯ ➪ ❮CALL SIGN❯ ➪ ❮R1❯ (Push [MENU/ ]) (Rotate [DIAL]†, then push [ ](5)‡.) • Pushing and holding [CS](9) for 1 sec. is also available to enter call sign set mode. x Rotate [DIAL]† to select the nearest repeater's call sign. • If the nearest repeater is a gateway repeater, select the repeater's call sign with "G" setting at the 8th digit. c Push [ ](5) to set the call sign for "R1." • Return to CALL SIGN screen. v Rotate [DIAL]† to select "R2" then push [ ](5)†. b Rotate [DIAL]† to select the gateway repeater's (in the same zone) call sign. • The call sign should have "G" set as at the 8th digit. • When gateway repeater call sign is set in "R1," select "NOT USE✱" for "R2" setting. 44 n Push [ ](5) to set the call sign for "R2." • Return to CALL SIGN screen. CALL SIGN rUR:CQCQCQ R1:RPT1AA R2:NOT USE* MY:MYCALL /IC92 m Push [MENU/ ] to return to frequency indication. t Push [PTT] to transmit; release to receive. †[DIAL] ↔ [ ](2)/[ ](8) ‡[ ](5) ↔ [ ](6)