Icom IC-92AD Instruction Manual - Page 99

PRIORITY WATCH 11 ■ Priority watch operation 1 Although [DIAL] and [ ](5) are used for description in this section, [ ](2)/[ ](8) and [ ](6) are available instead of [DIAL] and [ ](5). • During priority watch FM PRIO A433 260 2 3 FM PRIO A145 180 4 D Memory/call channel and memory scan watch q Select VFO mode; then, set an operating frequency. w Select the channel(s) to be watched. For memory channel watch: Select the desired memory channel. For call channel watch: Select the desired call channel. For memory scan watch: PSKIP µ 035 5 Monitors VFO frequency for 5 sec. Pauses on a memory or 6 call channel when a 7 signal is received. 8 • During priority watch with priority beep 9 Select memory mode, or the desired bank group; then, push and hold [SCAN](2) for 1 sec. to start memory/bank scan. e Enter "PRIO WATCH" in scan set mode. (p. 108) FM PRIO A433 260 PSKIP FM PRIO A145 180 10 11 µ 035 12 ❮MENU screen❯ ➪ ❮SCAN❯ ➪ ❮PRIO WATCH❯ (Push [MENU/ ]) (Rotate [DIAL]†, then push [ ](5)‡.) r Rotate [DIAL]† to select "ON." Emits beep and blinks "S" indicator when a signal is 13 received on a memory or call channel. 14 • Select "BELL" if the priority beep function is desired. t Push [MENU/ ] to exit scan set mode and start the 15 watch. 16 • "PRIO" indicator appears. • The transceiver checks the memory/bank channel(s) or call 17 channel every 5 sec. • The watch resumes according to the selected scan resume 18 condition. (p. 89) y Push [VFO] to cancel the watch. †[DIAL] ↔ [ ](2)/[ ](8) 19 ‡[ ](5) ↔ [ ](6) 91