Icom IC-92AD Instruction Manual - Page 83

9 MEMORY/CALL CHANNELS ■ Memory bank setting The IC-92AD has a total of 26 banks (A to Z). Regular memory channels, 000 to 799 (A band) / 000 to 399 (B band), are assigned to the desired bank for easy memory management. qPush and hold [S.MW](MR) for 1 sec. to enter select memory write mode. • 1 short and 1 long beep sound. • Memory channel number blinks. w Rotate [DIAL] to select the desired memory channel. e Push [ ](2) or [ ](8) to select "BANK." • Bank group and channel number is displayed if the selected memory channel has already been previously assigned to a bank. [DIAL] FM r145 870 µ 011 BANK :---- MNAME: SKIP :OFF Push 2 SCAN or 8 TS 2 SCAN 8 TS MR B S.MW 145 870 µ 011 rBANK :---- MNAME: SKIP :OFF 1 r Push [ ](4) or [ ](6) to select the desired bank group (A- 2 Z) or bank channel (0-99) digit. 3 [DIAL] 4 145 870 µ 011 rBANK :C-00 5 MNAME: 6 SKIP :OFF 7 4 Bank group is selected 6 8 DUP M.NAME with [DIAL]. 9 t Rotate [DIAL] to select the bank group (from "A" to "Z") or 10 bank channel number (from "00" to "99"). 11 145 870 µ 011 12 rBANK :C-05 13 MNAME: SKIP :OFF 14 Bank channel is 15 selected with [DIAL]. 16 y Push and hold [S.MW](MR) for 1 sec. to assign the channel to the bank. 17 • Return to the previous indication. 18 19 75