Icom IC-92AD Instruction Manual - Page 23
Mode selection
View all Icom IC-92AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
4 FREQUENCY AND CHANNEL SETTING ■ Mode selection D VFO mode VFO mode is used to set the desired frequency. ➥ Push [VFO] to select VFO mode. VFOA MHz • VFO mode indication +DUP DTCS FM PRIO WX EMR A146 010 MemoName PSKIP µ 000 LOW ATT What is VFO? VFO is an abbreviation of Variable Frequency Oscillator. Frequencies for both transmitting and receiving are generated and controlled by the VFO. Set the attenuator function ON (☞p. 22) if the received signal is blocked by other radio station when using a third party high-gain antenna. D Memory mode Memory mode is used for operation on memory channels which store programmed frequencies. 4 q Push [MR] to select memory mode. • "µ " appears when memory mode is selected. MR B S.MW • Memory mode indication +DUP DTCS FM PRIO WX EMR A433 000 MemoName PSKIP µ 001 LOW ATT Appear w Rotate [DIAL] to select the desired memory channel. • Only programmed memory channels can be selected. • Enter the memory channel directly to select the desired memory channel. (p. 72) • See p. 74 for memory programming details. 15