Icom IC-92AD Instruction Manual - Page 54

7 DV MODE OPERATION ■ Received call sign When a call is received in DV mode, the calling station and the repeater call signs being used can be stored into the received call record. The stored call signs are viewable in the following manner. Up to 20 calls can be recorded. D Desired call record indication q Enter RX call sign set mode. ❮MENU screen❯ ➪ ❮RX CALL SIGN❯ (Push [MENU/ ]) (Rotate [DIAL]†, then push [ ](5)‡.) • Pushing and holding [CD](.) for 1 sec. is also available to enter RX call sign set mode. • RX CALL SIGN screen is displayed. w Rotate [DIAL]† to select the desired record channel. e To confirm the received call, push [ ](5) several times to select the desired call sign from CALLER, CALLED, RXRPT1 and RXRPT2. CALLER : The station call sign that made a call. CALLED : The station call sign called by the caller. RXRPT1 : The repeater call sign used by the caller station. RXRPT2 : The repeater call sign linked from RXRPT1. r Push [MENU/ ] to return to frequency indication. †[DIAL] ↔ [ ](2)/[ ](8) 46 ‡[ ](5) ↔ [ ](6) • Station call sign RX CALL SIGN rRX01 CALLER: AAAAAA / :CALLED :SEL :COPY CLR:CLR • Repeater 2 call sign RX CALL SIGN rRX01 RXRPT2: • Called station call sign RX CALL SIGN rRX01 CALLED: CQCQCQ :RXRPT1 :SEL :COPY CLR:CLR Push 5 SKIP • Repeater 1 call sign RX CALL SIGN rRX01 RXRPT1: :CALLER :SEL :COPY CLR:CLR :RXRPT2 :SEL :COPY CLR:CLR NOTE: When a call is received in DV mode when the power save function is activated, the call sign may not be received correctly. This is normal, not a malfunction, because the call sign information cannot be detected during power save. Turn the power save function OFF (p. 129) if you want to receive a call sign correctly even in stand-by operation. ✔ For your information When receiving a call, the received station call sign is automatically displayed and scrolled in sequence at the bottom line of the function display. This can be turned OFF in display set mode. (p.113)