Icom IC-92AD Instruction Manual - Page 65

Low-speed data communication application, setting, Low-speed data communication operation,

Get Icom IC-92AD PDF manuals and user guides View all Icom IC-92AD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

DV MODE OPERATION 7 D Low-speed data communication application setting Configure the low-speed data communication application as follows. • Port : The same COM port number as IC-92AD's • Baud rate : 38.4 kbps (fixed value) • Data : 8 bit • Parity : None • Stop : 1 bit • Flow control : Xon/Xoff D Low-speed data communication operation NOTE: Confirm that in AUTO, the computer controls when [PTT] is activated to send data and the user doesn't have to operate the radio. q Set your own, station call signs, etc. as described in "Digital voice mode operation" (p. 38) and "Digital repeater operation" (p. 41). w Refer to the instructions of the low-speed data communication application. e To transmit data • At the same time as your voice audio, push and hold [PTT] to transmit while sending data from the PC. Release [PTT] to receive. • Under computer control, see Transmission condition setting at right. 1 D Transmission condition setting 2 q Enter "DV DATA TX" in DV set mode. (p. 100) 3 ❮MENU screen❯ ➪ ❮DV SET MODE❯ ➪ ❮DV DATA TX❯ 4 (Push [MENU/ ]) (Rotate [DIAL]†, then push [ ](5)‡.) 5 w Rotate [DIAL]† to select "PTT" or "AUTO." PTT : The input data from [DATA/SP/MIC] are transmit- 6 ted when pushing [PTT]. (default) 7 AUTO : The input data from [DATA/SP/MIC] are transmitted automatically when the data are input. 8 e Push [ ](5) (or [ ](4)) to return to DV set mode, and push 9 [MENU/ ] to return to frequency indication. 10 ✔ For your information 11 While operating low-speed data communication via the inter- net network from one zone to another zone, some packets 12 may be lost due to network error (poor data throughput per- 13 formance). In such a case, the IC-92AD displays an "L" in the upper right corner on the display to indicate Packet Loss has 14 occurred. 15 16 DV L Appears B4 3 0 7 1 250 17 18 †[DIAL] ↔ [ ](2)/[ ](8) 19 ‡[ ](5) ↔ [ ](6) 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
57
7
DV MODE OPERATION
7
D
Low-speed data communication application
setting
Configure the low-speed data communication application as
follows.
• Port
:
The same COM port number as IC-92AD’s
• Baud rate
: 38.4 kbps
(fixed value)
• Data
: 8 bit
• Parity
: None
• Stop
: 1 bit
• Flow control : Xon/Xoff
D
Low-speed data communication operation
NOTE:
Confirm that in AUTO, the computer controls when
[PTT]
is activated to send data and the user doesn’t have
to operate the radio.
q
Set your own, station call signs, etc. as described in “Dig-
ital voice mode operation”
(p. 38)
and “Digital repeater op-
eration”
(p. 41)
.
w
Refer to the instructions of the low-speed data communi-
cation application.
e
To transmit data
•
At the same time as your voice audio, push and hold
[PTT]
to
transmit while sending data from the PC. Release
[PTT]
to re-
ceive.
•
Under computer control, see Transmission condition setting at
right.
D
Transmission condition setting
q
Enter “DV DATA TX” in DV set mode.
(p. 100)
w
Rotate
[DIAL]
†
to select “PTT” or “AUTO.”
PTT
:
The input data from [DATA/SP/MIC] are transmit-
ted when pushing [PTT].
(default)
AUTO
:
The input data from [DATA/SP/MIC] are transmit-
ted automatically when the data are input.
e
Push
[
](5)
(or
[
](4)
)
to return to DV set mode, and push
[MENU/
]
to return to frequency indication.
✔
For your information
While operating low-speed data communication via the inter-
net network from one zone to another zone, some packets
may be lost due to network error (poor data throughput per-
formance). In such a case, the IC-92AD displays an “L” in the
upper right corner on the display to indicate Packet Loss has
occurred.
†
[DIAL]
↔
[
](2)
/
[
](8)
‡
[
](5)
↔
[
](6)
1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
19
❮
MENU screen
❯
➪
❮
DV SET MODE
❯
➪
❮
DV DATA TX
❯
(Push
[MENU/
]
) (Rotate
[DIAL]
†
, then push
[
](5)
‡
.)
L
DV
DV
B
43
43
0
712
712
50
50
Appears