Icom IC-92AD Instruction Manual - Page 117

MENU SCREEN OPERATION 12 D Memory bank link function Sets the memory bank link function ON (default) and OFF. The link function provides continuous bank scan, scanning all contents in the selected banks during bank scan. • Bank link setting q Rotate [DIAL]† to select the bank that you want to change. BANK LINK rBANK-A:ON BANK-B:ON BANK-C:ON BANK-D:ON BANK-E:ON BANK LINK \ BANK-V:ON BANK-W:ON BANK-X:ON BANK-Y:ON rBANK-Z:ON w Push [ ](5)‡ to enter bank setting. e Rotate [DIAL]† to select the setting. BANK-A OFF rON BANK-A rOFF ON r Push [ ](5) to set and return to the BANK LINK screen. t Rotate [DIAL]† to select next bank and repeat steps w to r, or push [MENU/ ] to exit scan set mode. †[DIAL] ↔ [ ](2)/[ ](8) ‡[ ](5) ↔ [ ](6) D Program scan link function Sets the program scan link function ON (default; P-01-P24) and OFF (default; P-00). The link function provides continuous program scan in the selected program scan number during program scan. • Program scan link setting q Rotate [DIAL]† to select the program scan number that you want to change. PSCAN LINK rP-00:OFF P-01:ON P-02:ON P-03:ON P-04:ON PSCAN LINK \ P-01:ON P-02:ON P-03:ON rP-04:ON P-05:ON w Push [ ](5)‡ to enter program scan setting. e Rotate [DIAL]† to select the setting. PSCAN-00 rOFF ON PSCAN-00 OFF rON r Push [ ](5) to set and return to the PSCAN LINK screen. t Rotate [DIAL]† to select next program scan and repeat steps w to r, or push [MENU/ ] to exit MENU screen operation. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 109