Icom IC-92AD Instruction Manual - Page 61
Message Transmission
View all Icom IC-92AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
DV MODE OPERATION 7 D Message Transmission Toggle the message transmission function ON (Ch01-05) and OFF. When a message channel is selected, the transceiver transmits a text message (pre-programmed). (default: OFF) q Set the operating frequency, call signs and other settings, such as repeater operation, as desired in B band. w Perform the steps q to e in "D TX message programming" as at left. e Rotate [DIAL]† to select the desired message channel. • "Ch01" to "Ch05" available. • See left-hand pages for message programming. r Push [ ](5) to set the message for transmission. t Push [PTT] to transmit the selected message. • The message is transmitted each time [PTT] is pushed. • The message is transmitted each 30 sec. automatically during continuous transmission. y Release [PTT] to return to receive. u When the reply call with a message is received, the call sign and the message scrolls at the bottom of the function display. DV B4 3 0 7 1 250 MSG:Hello! Scrolls the received message. 1 2 ✔ For your information 3 The automatic received call sign and/or message indication 4 can be turned OFF in display set mode, if desired. ➥ RX CALL SIGN (p. 113) 5 ➥ RX MESSAGE (p. 113) 6 NOTE: Only one message can be stored in the IC-92AD. 7 The received message is cleared by turning power OFF, 8 or overwritten when another message is received. A transmitted message that includes lower case charac- 9 ters from the IC-92AD may not be decoded and displayed 10 correctly by the ID-800H, IC-V82/U82, etc. 11 12 13 14 15 16 17 18 †[DIAL] ↔ [ ](2)/[ ](8) 19 ‡[ ](5) ↔ [ ](6) 53