Icom IC-92AD Instruction Manual - Page 64
EMR Emergency communication, Low-speed data communication - software
View all Icom IC-92AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
7 DV MODE OPERATION ■ EMR (Emergency) communication The EMR communication mode is available for digital mode operation. In the EMR communication mode, no call sign setting is necessary. When an EMR communication mode signal is received, the audio (voice) will be heard at the specified level even the volume setting level is set to minimum level, or digital call sign/digital code squelch is in use. q Set the desired frequency in 144 or 440 MHz band then push [MENU/ ] to select menu mode indication. w Rotate [DIAL]† to select "DV SET MODE," then push [ ](5)†. e Rotate [DIAL]† to select "EMR," then push [ ](5)†. r Rotate [DIAL]† to select the desired EMR condition. OFF : EMR communication set OFF. (default) ON : EMR communication set ON. • "EMR" appears when selecting "ON". DV EMR Appears B4 3 0 7 1 250 ■ Low-speed data communication In addition to the digital voice communication, low-speed data communication is available. The optional OPC-1799 DATA COMMUNICATION CABLE and serial data communication software (purchase locally) are required in addition. The optional RS-92 REMOTE CONTROL SOFTWARE (OPC-1799 supplied) also includes a low-speed data communication capability. NOTE: Turn OFF the GPS mode (p. 58) in advance to operate the low-speed data communication. D Connection Connect the transceiver to your PC using with the optional OPC-1799 as illustrated below. to [DATA/SP/MIC] t Push [ ](5). • Returns to DV SET MODE screen automatically. y Push [MENU/ ] to return to frequency indication. NOTE: The EMR communication function is turned OFF automatically when turning transceiver's power OFF 56 to RS-232C OPC-1799 Supplied with RS-92