Icom IC-92AD Instruction Manual - Page 28
Basic Operation
![]() |
View all Icom IC-92AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
5 BASIC OPERATION ■ Receiving Make sure a charged battery pack (BP-256) or brand new alkaline batteries (BP-257) are installed (pgs. 1, 12). q Push and hold [PWR] for 1 sec. to turn power ON. w Rotate [VOL] to set the desired audio level. • The frequency display shows the volume level while setting. See the section at right for details. e Set the receiving frequency. (p. 18) r Set the squelch level. (p. 21) • While pushing and holding [SQL], rotate [DIAL]. • The first click of [DIAL] indicates the current squelch level. • "LEVEL 1" is loose squelch (for weak signals) and "LEVEL 9" is tight squelch (for strong signals). • "AUTO" indicates automatic level adjustment by a noise pulse counting system. • Push and hold [SQL] to open the squelch manually. t When a signal is received: • Squelch opens and audio is output. • The S/RF-meter shows the relative signal strength level. r Push for setting the squelch (Push to monitor) e Set frequency r Set squelch level w Set audio level q [PWR] e Select band 20 ■ Setting audio volume Rotate [VOL] to adjust the audio level. • If squelch is closed, push and hold [SQL] while setting the audio level. • The display shows the volume level while setting. [SQL] [VOL] +DUP DTCS FM PRIO WX EMR A 1 4 5 0 0 025 MemoName PSKIP µ 000 LOW ATT VOL PSKIP µ 000 Volume level indicator VOL PSKIP µ 000 Minimum setting (no audio) VOL PSKIP µ 000 Maximum setting
![](/manual_guide/products/icom-ic92ad-instruction-manual-b1b3608/28.png)