Icom IC-92AD Instruction Manual - Page 55
One-touch reply using the call record
![]() |
View all Icom IC-92AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
DV MODE OPERATION 7 D One-touch reply using the call record The stored call signs in the call record can be used to the call. q After receiving a call, push and hold [RX➝CS](CALL) for 1 sec. Or, while pushing and holding [RX➝CS](CALL), rotate [DIAL] to select the desired call sign record. -DUP DV B4 3 9 7 0 625 AAAAAA The received call sign is displayed while pushing and holding [CALL/RX➝CS] when [DIAL] is rotated while [CALL/RX➝CS] is pushed. • Set your own call sign (MY) in advance. (p. 34) • The call sign stored in "CALLER" is stored as "UR," "RXRPT1" is stored as "R2" and "RXRPT2" is stored as "R1." • Error beeps sound when a call sign is received incorrectly, and no call sign is set in this case. w Push [PTT] to transmit; release to receive. Important! 1 Setting call signs with the "One-touch reply using the call record" operation as at left are for temporary operation 2 only. Therefore, the set call signs will be overwritten when 3 another call record is used to set call signs. • Never saved into a call sign memory. 4 5 If you want to save the set call signs, see "Copying the call record contents into call sign memory" (p. 50) for details. 6 7 8 9 ✔For your information When a call specifying your call sign is received, the call 10 signs of the calling station and the repeater it is using can be automatically used for operation. 11 12 • When "RX call sign auto write" (p. 101) is set to "AUTO," the station call sign in "CALLER" is set to "UR" automatically. 13 • When "Repeater call sign auto write" (p. 101) is set to 14 "AUTO," the stored station call sign in "RXRPT1" is stored 15 as "R2" and "RXRPT2" is stored as "R1" automatically. 16 17 18 19 47
![](/manual_guide/products/icom-ic92ad-instruction-manual-b1b3608/55.png)