Icom IC-92AD Instruction Manual - Page 89

9 MEMORY/CALL CHANNELS ■ Erasing/transferring bank contents 1 The bank contents of programmed memory channels can be cleared or reassigned to another memory bank. INFORMATION: Even if the memory bank contents are cleared, the memory channel contents still remain programmed. qSelect the desired bank contents to be transferred or erased from the bank. (p. 76) ➥ Push [MR] several times to select memory bank mode. ➥ While pushing [BAND], rotate [DIAL] to select the desired memory bank group. • Pushing [BAND] also can be select the band. ➥ Rotate [DIAL] to select the bank channel. [DIAL] e Push [ ](2) or [ ](8) several times to select "BANK." 2 r Push [ ](4) or [ ](6) to select the desired bank group or bank channel to be transferred. 3 t Rotate [DIAL] to select the desired bank group or channel. 4 • Select "- - - -" indication when erasing the contents from the bank. 5 To transfer the bank contents 6 to ch 11 in Bank B. FM 7 145 600 µ 025 [DIAL] rBANK :B-11 8 BNAME: MNAME: 9 SKIP :OFF 10 2 SCAN Bank channel is displayed. 11 FM A433 000 D BAND µ C05 MR B S.MW 4 DUP 6 M.NAME 8 TS To erase 12 MR B FM S.MW 145 600 µ 025 13 rBANK :---- BNAME: 14 MNAME: SKIP :OFF 15 w Push [S.MW](MR) for 1 sec. to enter select memory write mode. • 1 short and 1 long beeps sound. • Displays the original memory channel number automatically and memory channel number blinks. • Do not hold [S.MW](MR) for more than 2 sec., otherwise the memory contents will be copied to VFO. is displayed. 16 y Push [S.MW](MR) for 1 sec. to erase/transfer the bank 17 contents. 18 19 81