Konica Minolta bizhub PRESS C7000/C7000P IC-307 User Guide - Page 87

Simulating a job with your template 79 Simulating a job with your template Check how a job from the Storage area looks if you apply an imposition template to it. The Imposition Template Builder is available only with the Professional Power Kit. Note: The imposition template parameters are not actually applied to the job -you see only a simulation of how the job would look if this template were selected on the Imposition tab. 1. In the Imposition Template Builder window, click the Simulate button. 2. Click Browse. 3. Select a job, and then click Select. The parameters of the job appear with their values in the Simulate Imposition window. 4. Change the parameters as desired. 5. Click View Simulated Job. The Preview window appears. A simulation of the job is displayed with the current imposition template applied. Editing an imposition template Rotating a page 180° The Imposition Template Builder is available only with the Professional Power Kit. Use the template viewer to rotate one or more pages and change the location of pages on the sheet. 1. Make sure that the Apply changes to front and back check box is clear. 2. Select the desired page. Note: To select multiple consecutive pages, click the first page, press and hold Shift, and then click the last page. Select multiple nonconsecutive pages by pressing and holding Ctrl as you click each page. The gray arrow on each page indicates the top of the page. The page number is indicated by the number that appears on each page. 3. Click Rotate 180 .