Lexmark MB2236 Users Guide PDF - Page 25
Setting up fax in countries or regions with different telephone wall jacks and plugs, Notes
View all Lexmark MB2236 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Set up, install, and configure 25 Notes: • If you have only one telephone number on your line, then set the printer to receive faxes automatically. • Set the printer to pick up calls two rings after the answering machine. For example, if the answering machine picks up calls after four rings, then set the printer Rings to Answer setting to 6. Setting up fax in countries or regions with different telephone wall jacks and plugs CAUTION-SHOCK HAZARD: To avoid the risk of electrical shock, do not set up this product or make any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a lightning storm. CAUTION-SHOCK HAZARD: To avoid the risk of electrical shock, do not use the fax feature during a lightning storm. CAUTION-POTENTIAL INJURY: To reduce the risk of fire, use only a 26 AWG or larger telecommunications (RJ-11) cord when connecting this product to the public switched telephone network. For users in Australia, the cord must be approved by the Australian Communications and Media Authority. The standard wall jack adopted by most countries or regions is RJ11. If the wall jack or equipment in your facility is not compatible with this type of connection, then use a telephone adapter. An adapter for your country or region may not come with your printer, and you may need to purchase it separately. There may be an adapter plug installed in the telephone port of the printer. Do not remove the adapter plug from the telephone port of the printer if you are connecting to a serial or cascaded telephone system. Part name Lexmark adapter plug Part number 40X8519