Netgear DG834Gv3 DG834Gv3 Reference Manual - Page 121
Using Auto Policy to Con VPN Tunnels on Activating a VPN Tunnel - repeater
View all Netgear DG834Gv3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Reference Manual for the ADSL Modem Wireless Router DG834G Note: Refer to "Using Auto Policy to Configure VPN Tunnels" on page 7-38 to enable the IKE keepalive capability on an existing VPN tunnel. 6. Repeat for the DG834G v3 on LAN B and pay special attention to use the following network settings as appropriate. • WAN IP of the remote VPN gateway (e.g., 14.15.16.17) • LAN IP settings of the remote VPN gateway: - IP Address (e.g, 192.168.0.1) - Subnet Mask (e.g., 255.255.255.0) - Preshared Key (e.g., 12345678) 7. Use the VPN Status screen to activate the VPN tunnel by performing the following steps: Note: The VPN Status screen is only one of three ways to active a VPN tunnel. See "Activating a VPN Tunnel" on page 7-29 for information on the other ways. Virtual Private Networking v1.0, January 2006 7-27