Netgear DG834Gv3 DG834Gv3 Reference Manual - Page 48
WAN Users, Start, Finish, Never, Always, Match, Not match
View all Netgear DG834Gv3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Reference Manual for the ADSL Modem Wireless Router DG834G • WAN Users-These settings determine which packets are covered by the rule, based on their source (WAN) IP address. Select the desired option: - Any - all IP addresses are covered by this rule. - Address range - if this option is selected, you must enter the Start and Finish fields. - Single address - enter the required address in the Start field. • Log-You can select whether the traffic will be logged. The choices are: - Never - no log entries will be made for this service. - Always - any traffic for this service type will be logged. - Match - traffic of this type which matches the parameters and action will be logged. - Not match - traffic of this type which does not match the parameters and action will be logged. Inbound Rule Example: Allowing Videoconferencing If you want to allow incoming videoconferencing to be initiated from a restricted range of outside IP addresses, such as from a branch office, you can create an inbound rule. In the example shown here, CU-SeeMe connections are allowed only from a specified range of external IP addresses. In this case, we have also specified logging of any incoming CU-SeeMe requests that do not match the allowed parameters. Figure 4-6 4-8 v1.0, January 2006 Protecting Your Network