Netgear DG834Gv3 DG834Gv3 Reference Manual - Page 140
General, Remote Address Data e.g., Apply - as repeater
View all Netgear DG834Gv3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Reference Manual for the ADSL Modem Wireless Router DG834G 5. Click Apply. The Get VPN Policies web page is displayed. Figure 7-44 6. Repeat for the DG834G v3 on LAN B and pay special attention to use the following network settings as appropriate. • General, Remote Address Data (e.g., 14.15.16.17) • Remote LAN, Start IP Address - IP Address (e.g, 192.168.0.1) - Subnet Mask (e.g., 255.255.255.0) - Preshared Key (e.g., 12345678) 7. Use the VPN Status screen to activate the VPN tunnel by performing the following steps: Note: The VPN Status screen is only one of three ways to active a VPN tunnel. See "Activating a VPN Tunnel" on page 7-29 for information on the other ways. 7-46 v1.0, January 2006 Virtual Private Networking
Reference Manual for the ADSL Modem Wireless Router DG834G
7-46
Virtual Private Networking
v1.0, January 2006
5.
Click
Apply
. The Get VPN Policies web page is displayed.
6.
Repeat for the DG834G v3 on LAN B and pay special attention to use the following network
settings as appropriate.
•
General, Remote Address Data (e.g.,
14.15.16.17
)
•
Remote LAN, Start IP Address
—
IP Address (e.g,
192.168.0.1
)
—
Subnet Mask (e.g.,
255.255.255.0
)
—
Preshared Key (e.g.,
12345678
)
7.
Use the VPN Status screen to activate the VPN tunnel by performing the following steps:
Figure 7-44
Note:
The VPN Status screen is only one of three ways to active a VPN tunnel. See
“Activating a VPN Tunnel” on page 7-29
for information on the other ways.