Netgear DG834Gv3 DG834Gv3 Reference Manual - Page 168
toFVL328, fvl328.dyndns.org
View all Netgear DG834Gv3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Reference Manual for the ADSL Modem Wireless Router DG834G 5. Configure the DG834G v3 as in the Gateway-to-Gateway procedures using the VPN Wizard (see "How to Set Up a Gateway-to-Gateway VPN Configuration" on page 7-21), being certain to use appropriate network addresses for the environment. The LAN Addresses used in this example are as follows: Device DG834G v3 FVL328 LAN IP Address 10.5.6.1 172.23.6.1 LAN Subnet Mask 255.255.255.0 255.255.255.0 a. In Step 1, enter toFVL328 for the Connection Name. b. In Step 2, enter fvl328.dyndns.org for the remote WAN's IP address. c. In Step 3, enter the following: • IP Address = 172.23.9.1 • Subnet Mask = 255.255.255.0 6. Configure the FVL328 as in the Gateway-to-Gateway procedures for the VPN Wizard (see "How to Set Up a Gateway-to-Gateway VPN Configuration" on page 7-21), being certain to use appropriate network addresses for the environment. a. In Step 1, enter toDG834 for the Connection Name. b. In Step 2, enter dg834g.dyndns.org for the remote WAN's IP address. c. In Step 3, enter the following: • IP Address = 10.5.6.1 • Subnet Mask = 255.255.255.0 7. Test the VPN tunnel by pinging the remote network from a PC attached to the DG834G v3. a. Open the command prompt (Start -> Run -> cmd) b. ping 172.23.9.1 B-12 v1.0, January 2006 NETGEAR VPN Configuration