Netgear DG834Gv3 DG834Gv3 Reference Manual - Page 158
Step-By-Step Configuration, toFVL328
View all Netgear DG834Gv3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Reference Manual for the ADSL Modem Wireless Router DG834G 10.5.6.0/24 LAN IP 10.5.6.1 VPNC Example Network Interface Addressing Gateway A DG834G 14.15.16.17 WAN IP 22.23.24.25 WAN IP Gateway B FVL328 172.23.9.0/24 LAN IP 172.23.9.1 Figure B-1 Note: Product updates are available on the NETGEAR, Inc. web site at http://kbserver.netgear.com/DG834G v3.asp. Step-By-Step Configuration 1. Configure the DG834G v3 as in the Gateway-to-Gateway procedures using the VPN Wizard (see "How to Set Up a Gateway-to-Gateway VPN Configuration" on page 7-21), being certain to use appropriate network addresses for the environment. The LAN Addresses used in this example are as follows: Unit DG834G FVL328 WAN IP 14.15.16.17 22.13.24.25 LAN IP 10.5.6.1 172.23.9.1 LAN Subnet Mask 255.255.255.0 255.255.255.0 a. In Step 1, enter toFVL328 for the Connection Name. b. In Step 2, enter 22.23.24.25 for the remote WAN's IP address. c. In Step 3, enter the following: • IP Address = 172.23.9.1 • Subnet Mask = 255.255.255.0 B-2 NETGEAR VPN Configuration v1.0, January 2006