Netgear DG834Gv3 DG834Gv3 Reference Manual - Page 125
Gateway-to-Gateway Configuration, Ctrl-C, test the VPN tunnel by pinging the remote network
View all Netgear DG834Gv3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Reference Manual for the ADSL Modem Wireless Router DG834G Figure 7-31: Running a Ping test to the LAN from the PC This will cause a continuous ping to be sent to the first DG834G v3. After between several seconds and two minutes, the ping response should change from "timed out" to "reply." Note: Use Ctrl-C to stop the pinging. Figure 7-32 Once the connection is established, you can open the browser of the PC and enter the LAN IP address of the remote DG834G v3. After a short wait, you should see the login screen of the Modem Router (unless another PC already has the DG834G v3 management interface open). • Gateway-to-Gateway Configuration-test the VPN tunnel by pinging the remote network from a PC attached to the DG834G v3. a. Open command prompt (i.e., Start -> Run -> cmd). Virtual Private Networking v1.0, January 2006 7-31