Netgear GS748Tv5 Software Administration Manual - Page 18

GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches 5. Select the Use the following IP address option and set the IP address of the administrative system to an address in the 192.168.0.0 network, such as 192.168.0.200. The IP address must be different from that of the switch but within the same subnet. WARNING: When you change the IP address of your administrative system, you lose your connection to the rest of the network. Be sure to write down your current network address settings before you change them. 6. Click the OK button.  To configure a static address on the switch: 1. Use a straight-through cable to connect the Ethernet port on the administrative system directly to any port on the switch. 2. Open a web browser on your computer and connect to the management interface. For more information, see Access the Management Interface from a Web Browser on page 19. 3. Change the network settings on the switch to match those of your network. For more information, see IP Configuration on page 37. After you change the network settings on the switch, return the network configuration on your administrative system to the original settings. Getting Started 18