Netgear GS748Tv5 Software Administration Manual - Page 244

GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches Trap Logs Use the Trap Logs screen to view information about the SNMP traps generated on the switch. To view trap log information, select Monitoring > Logs > Trap Logs. The Trap Logs screen displays. The following table describes the Trap Log information displayed on the screen. Table 75. Trap log statistics Field Description Number of Traps Since The number of traps that have occurred since the switch last reboot. Last Reset Trap Log Capacity The maximum number of traps stored in the log. If the number of traps exceeds the capacity, the entries will overwrite the oldest entries. Number of Traps Since The number of traps that have occurred since the traps were last displayed. Log Last Viewed Displaying the traps by any method (such as terminal interface display, web display, or upload file from switch) will cause this counter to be cleared to 0. The screen also displays information about the traps that were sent. Table 76. Trap log information Field Log System Up Time Trap Description The sequence number of this trap. The time at which this trap occurred, expressed in days, hours, minutes, and seconds since the last reboot of the switch. Information identifying the trap. Monitoring the System 244