Netgear GS748Tv5 Software Administration Manual - Page 209
Destination L4 port protocol, Destination L4 port value, Source L4 port protocol, Source L4 port
View all Netgear GS748Tv5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches Table 67. ACL fields according to selected ACL type. ACL Based On Fields Destination IPv6 L4 Port Source IPv6 L4 Port • Destination L4 port (protocol). Specify the destination IPv6 L4 port protocol. • Destination L4 port (value). Specify the destination IPv6 L4 port value. • Source L4 port (protocol). Specify the source IPv6 L4 port protocol. • Source L4 port (value). Specify the source IPv6 L4 port value. 7. In the Binding Configuration area, specify the packet filtering direction for an ACL in the Direction field. Only the inbound direction is valid for the switches. 8. In the Port Selection Table area, select each port and LAG to which the ACL is applied. In the following figure, the ACL rule is configured to check for packet matches on ports 8, 9, 13, and LAG 1. Packets that have a source address in the 192.168.3.0/24 network are permitted to be forwarded by the interfaces. All other packets are dropped because every ACL has an implicit deny all rule as the last rule. 9. Click the Add button. Managing Device Security 209