Netgear GS748Tv5 Software Administration Manual - Page 86

GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches LACP Configuration The LACP configuration screen is used to set the LACP system priority.  To configure LACP: 1. Select Switching > LAG > Advanced > LACP Configuration. 2. In the LACP System Priority field, specify the device's link aggregation priority relative to the devices at the other ends of the links on which link aggregation is enabled. A higher value indicates a lower priority. You can change the value of the parameter globally by specifying a priority from 1-65535. The default value is 32768. 3. Click the Apply button. LACP Port Configuration The LACP port configuration screen is used to configure the LACP priority value for the selected port and the administrative LACP time-out value.  To configure LACP port priority settings: 1. Select Switching > LAG > Advanced > LACP Port Configuration. 2. Select the ports to configure: For information about how to select and configure one or more ports and LAGs, see Configuring Interface Settings on page 28. 3. Configure the LACP Priority value for the selected port(s). This value specifies the device's link aggregation priority relative to the devices at the other ends of the links on which link aggregation is enabled. A higher value indicates a lower priority. 4. Configure the administrative LACP time-out value. • Long. Specifies a long time-out value. • Short. Specifies a short time-out value. 5. Click the Apply button. Configuring Switching 86