Netgear GS748Tv5 Software Administration Manual - Page 72
Binding Configuration, To con static DHCP bindings, System, Services, DHCP Snooping
View all Netgear GS748Tv5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches Binding Configuration Use this screen to view, add, and remove static bindings in the DHCP snooping bindings database and to view or clear the dynamic bindings in the bindings table. To configure static DHCP bindings: 1. Select System > Services > DHCP Snooping > Binding Configuration. 2. From the Interface list, select the interface on which the DHCP client is authorized. 3. In the MAC Address field, specify the MAC address for the binding to be added. This is the key to the binding database. 4. From the VLAN ID list, field, select the ID of the VLAN the client is authorized to use. 5. In the IP Address field, specify the IP address of the client. 6. Click the Add button. The DHCP snooping binding entry is added to the database. The DHCP Snooping Dynamic Binding Configuration table shows information about the DHCP bindings that have been learned on each interface on which DHCP snooping is enabled. The following table describes the dynamic bindings information. Table 21. DHCP snooping dynamic binding information Field Interface MAC Address VLAN ID IP Address Lease Time Description The interface on which the DHCP client message was received. The MAC address associated with the DHCP client that sent the message. This is the key to the binding database. The VLAN ID of the client interface. The IP address assigned to the client by the DHCP server. The remaining IP address lease time for the client. Configure System Information 72