Panasonic AG-HPD24PJ Operating Instructions - Page 125

TC/UB/CTL Use this menu to set the time code. Settings and brief function description Item XX indicates factory default settings. CTL DISPLAY Selects 12 or 24 hour clock for the CTL counter display. ±12h: 12-hour clock display 24h: 24-hour clock display SYSTEM FREQ indications 59.94 Hz 50 Hz 23.98 Hz 24 Hz Mode 2D 3D SYNC PB (Main) MM M 59-23 Hz 60-24 Hz Specifies whether or not a VITC signal will be output at the locations selected in the VITC POS-1 and VITC POS-2 menus. BLANK: VITC signals are not output. 59.94 Hz 50 Hz VITC BLANK THROUGH: VITC signals are output. MM M NOTE: • This setting is enabled only during VIDEO and SD SDI output. • In EE mode, the input signal is output with the VITC signal. Specifies the position where the VITC signal will be inserted. When set to 59.94 Hz: LINE 10 - LINE 16 - LINE 20 59.94 Hz 50 Hz When set to 50 Hz: LINE 7 - LINE 11 - LINE 22 VITC POS-1 NOTE: • You cannot select the same line as in the VITC POS-2 menu. • This setting is enabled only during VIDEO and SD SDI output. • Pressing RESET will not restore the factory defaults. • VITC signals are not output when 23.98 Hz, 24 Hz, 59 - 23 or 60 - 24 is set in the SETUP - SYSTEM - FREQUENCY menu setting. MM M Specifies the position where the VITC signal will be inserted. When set to 59.94 Hz: LINE 10 - LINE 18 - LINE 20 When set to 50 Hz: LINE 7 - LINE 12 - LINE 22 59.94 Hz 50 Hz VITC POS-2 NOTE: • You cannot select the same line as in the VITC POS-1 menu. • This setting is enabled only during VIDEO and SD SDI output. • Pressing RESET will not restore the factory defaults. • VITC signals are not output when 23.98 Hz, 24 Hz, 59 - 23 or MM M 60 - 24 is set in the SETUP - SYSTEM - FREQUENCY menu setting. Sets the TC operating mode of the built-in time code generator. REGEN: Synchronizes the internal time code generator to 59.94 Hz 50 Hz maintain the continuity with the time code last recorded on the 23.98 Hz 24 Hz TCG MODE P2 card. PRESET: Starts recording from the value set with the TC 59-23Hz 60-24 Hz MM PRESET button. EXIT: Uses the external time code input from the TIME CODE IN connector, video signal VITC or SLTC. Use menu (EXT TC SEL) to set. Sets the UB operating mode of the built-in time code generator. 59.94 Hz 50 Hz REGEN: Synchronizes the internal time code generator with the last user bits recorded on a P2 card. 23.98 Hz 24 Hz UBG MODE PRESET: Starts recording from the value set with the TC PRESET button. 59-23 Hz 60-24 Hz M M EXT: Uses the external UB from the TIME CODE IN connector, video signal VITC or SLTC. Use menu (EXT TC SEL) to set. 62 Setup Menu: Menu items