Panasonic AG-HPD24PJ Operating Instructions - Page 23
Control Reference Guide: I/O Connectors
View all Panasonic AG-HPD24PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Control Reference Guide • When recording 720p with an HD reference or no reference input, the recorded phase may be shifted from the input signal. • When the SETUP - SYSTEM - FREQUENCY menu setting is 59-23 or 60-24, the HD reference signal can only synchronize playback. 5. VIDEO OUT jack Provides analog composite video signal output. No signal is output when the SETUP SYSTEM - FREQUENCY menu setting is 24 Hz or 60-24. In both 3D REC/PB and SYNC PB modes, the sync signal output here is exclusively for use by another AG-HPD24. (➝ "3D Signal Recording and Playback" page 38, ➝ "Synchronous Playback" page 48) 6. HD/SD-SDI IN/OUT jacks These provide input and output of serial digital component audio/video signals. ◆ NOTE: • Use 5C-FB or equivalent double-shielded cable for connections. 7. HDMI OUT port Connects to a monitor or TV using an HDMI cable. In 3D REC/PB and SYNC PB modes, 3D video can be displayed by connecting a 3D monitor. (➝ "3D Signal Recording and Playback" page 38, ➝ "Synchronous Playback" page 48) ◆ NOTE: • This machine does not support VIERA link. Connecting it to a VIERA link compatible device with an HDMI cable may cause VIERA link to malfunction on that device. 8. REMOTE connector Connect to an external controller to remotely control the unit. ◆ NOTE: • Use double-shielded cable for connections. 9. LINK(D) connector Use this connector to link two units for 3D REC/PB and SYNC PB modes. (➝ "3D Signal Recording and Playback" page 38, ➝ "Synchronous Playback" page 48) ◆ NOTE: • Use a double-shielded RS-422A cable not longer than 1 m long for connection. 10.KEYBOARD port (USB 2.0 Type A) Connect an external USB keyboard to enter meta data. (➝ "Using a Keyboard" Vol. 2, page 80) 11.LINK(M) port (USB 2.0 Type A) (➝ "3D Signal Recording and Playback" page 38, ➝ "Synchronous Playback" page 48) ◆ NOTE: • Use double-shielded cable for connections. 12.USB2.0 device/LINK(S) port (Type B) (➝ "USB Device" page 37, ➝ "3D Signal Recording and Playback" page 38, ➝ "Synchronous Playback" page 48) ◆ NOTE: • Use double-shielded cable for connections. 13.Battery latch release button (➝ "Using a battery" page 25) 14.Power supply/battery mounting location (➝ "Power Preparations" page 25) 23 Control Reference Guide: I/O Connectors