Panasonic AG-HPD24PJ Operating Instructions - Page 126
VIDEO, Setup Menu: Menu items, Use this menu to make video settings.
View all Panasonic AG-HPD24PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Setup Menu Item Settings and brief function description XX indicates factory default settings. RUN MODE Specifies an operating mode that advances the internal time code generator. REC RUN: The internal time code generator is advanced only during recording. FREE RUN: When the power is on, the internal time code generator is advanced regardless of operating mode. NOTE: • When ON is selected in the SETUP - BASIC - VFR REC menu setting, the time code advances only during recording even when FREE RUN is selected. EXT TC SEL Specifies the time code used when an external time code is used. EXT LTC: Uses LTC from the TIME CODE IN connector. SLTC (VITC): Uses LTC data attached to serial signal input to HD SDI IN. When 480i or 576i is set in the SETUP - SYSTEM FORMAT menu setting, VTIC data input to SD SDI IN is used. DF MODE Sets the DF or NDF mode for CTL and TCG. DF: Uses drop frame mode. NDF: Uses non-drop frame mode. Specifies whether or not VITC data will be superimposed on HD SDI output. HD EMBD VITC ON: Superimposes VITC. OFF: Does not superimpose VITC. SYSTEM FREQ indications 59.94 Hz 50 Hz 23.98 Hz 24 Hz 59-23 Hz 60-24 Hz 59.94 Hz 50 Hz 23.98 Hz 24 Hz 59.94 Hz 59.94 Hz 50 Hz 23.98 Hz 24 Hz 59-23 Hz 60-24 Hz Mode 2D 3D SYNC PB (Main) MM MM MM M MM M Specifies whether or not LTC data will be superimposed on HD SDI output. HD EMBD LTC ON: Superimposes LTC. 59.94 Hz 50 Hz 23.98 Hz 24 Hz MM M OFF: Does not superimpose LTC. 59-23 Hz 60-24 Hz TC OUTPUT REF Switches the phase of time code output from the TIME CODE OUT connector relative to external LTC input when TCG MODE is set to EXT. (Only in EE mode) VOUT: Synchronized with output video signal. TC IN: Synchronized with the external time code input. 59.94 Hz 50 Hz 23.98 Hz 24 Hz MM VIDEO Use this menu to make video settings. Item INPUT SEL INT SG Settings and brief function description XX indicates factory default settings. Selects the video input signal. SDI: Selects the SDI connector. INT SG: Selects the internal signal generator. The signal switches to the internal signal selected using the menu "INT SG". Sets the internal signal type. SMPTE and ARIB signals are available in HD mode only (black in SD mode). 100 %CB: 100% color bar 75 %CB: 75% color bar SMPTE: SMPTE color bar ARIB: ARIB color bar BLACK: Black SYSTEM FREQ indications Mode 2D 3D SYNC PB (Main) 59.94 Hz 50 Hz 23.98 Hz 24 Hz MM 59-23 Hz 60-24 Hz 59.94 Hz 50 Hz 23.98 Hz 24 Hz MM 59-23 Hz 60-24 Hz Setup Menu: Menu items 63